Page 3
VIS400 User Guide
The VIS400 Fiber Inspection Scope is a low cost, and compact Inspection scope for verrifying compliance with the IEC
61300-3-35 Specification. This document will serve as an overview of the major features and functions of the device as
well as instructions for use with the Windows InSpec software. If you are looking for a standalone inspection system take
a look at the VIS300C inspection system. Or if you are looking for a device that can be used with an Android or IOS based
phone take a look at the VIS500
Introduction
Analyze Button
On the side of the VIS400 is a hardware
button that will attempt to analyze the
image currently displayed in the software.
USB Cable
The USB cable is used to
connect to the VIS300C or
windows PC
Connector Adapter
The VIS400 comes with a universal 2.5
adapter by default, however additional
adapters are available and are user
replaceable.
Device Overview
Focus Ring
Spinning this ring clockwise focuses toward
the fiber while counter clockwise moves
towards the users hand.
