Riotoro CR480 MID, Installation Manual

Page: 25 / 40

Chapter 2 Ready, Setup, Go 23
CR480 MID TOWER
Install the Power Supply
The power supply unit (PSU) drive bay is located on the bottom of the
case in a separate compartment.
- Remove the thumb screws located on the opposite side were the
motherboard area is located, Slide the PSU in the case PSU bay with
the fan facing the case bottom. Push the power supply to the rear
- Align the PSU and case mounting holes and attach the power supply
to the case with the provided PSU thumbscrews.
- Connect the relevant PSU cables to your motherboard and drives.
150 mm
85 mm 175 mm