Connect the fans directly to the motherboard using the appropriate fan header.
Alternatively, connect the fans to an RGB hub and controller (make sure they
are connected to the PSU).
Note:
The fans included are NON-RGB fans, DO NOT connect to the RGB header. To avoid issues follow the instructions
provided by the fan, controller and motherboard manufacturer. Connecting a NON-RGB RIOTORO FAN will potentially
set the RGB lightning out of sync, connect any non RGB fan or third party fan to the motherboard fan headers if needed.
1
2
ATTACHING THE CASE FAN CABLES
Check that the I/O cables is securely attached to the
fan hub and that the power cable is securely attached
at both ends (hub and PSU SATA cable).
Connect the fans to the appropiate fan headers, make
sure you use the correct header to avoid issues.
Power cable
SATA
connector
Power cable
I/O cable
Chapter 2
15
CR1288TG
FULL TOWER CASE
