Riotoro CR101BE, Manual

Page: 25 / 30

Chapter 3 24
TROUBLESHOOTING YOUR NEW CR101BE
CR101BE MID TOWER CASE
The Front panel LED for Power and HDD activity does not lit.
The polarity of the LED cables matter, and they are not connected as they should (inverted polarity),
connect the positive cable marked as “+” to the right motherboard “+” pin header, do the same for
the negative, (refer to your MB manual to identify the right pin headers.)
How to clean the Dust filters.
The CR101BE comes with dust filters, and are meant to help keep the computer components clean,
blocking the dust from the outside, they are located across several points that could potentially
be used as intake areas. (Fresh air intake)
- Magnetic filters: simply detach the filter, and use compressed canned air.
- Front bezel Foam filter: to access this, just pull the bezel from the bottom.
Once detached, Use canned air to clean it and then reinstall it