2
Reset Configuration to Defaults
If you are unsure of the scanner configuration or have
scanned the incorrect codes, please scan the “Default”
barcode. This will reset the scanner to its factory defaults.
(scan from A1 to A6 for USB HID, B1 for HID)
USB HID USB Serial
A1
B1
A2
A3
A4
A5
A6
Note:
Please install PL-2303 driver for
USB Serial.
Keyboard Language (For USB HID only)
Scan the appropriate country code as below to program the
keyboard layout for your country or language. As a general
rule, the following characters are supported, but need special
care for countries other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
USA
(Original setting)
Italian
Norway
France
Germany
Vietnam
Sweden
Spain
Denmark
Portugal
Switzerland
Hungary
Barcode Configuration Method:
Please follow the below 4 steps to complete the
"Symbologies Enable" or "Symbologies Disable"
1. Start Configuration
2. Choose one of 1D symbologies
3. Enable setting: scan Enable-1, then Enable-2
Disable setting: scan Disable-1, then Disable-2
4. End Configuration
Start
Configuration
1D Symbologies
– 1
UPC-A
UPC-E
EAN-13
(ISBN/ISSN)
EAN-8
Industrial
2 of 5
Matrix
2 of 5
Enable-1
Disable-1
Enable-2
Disable-2
End
Configuration
