background image

Battery Placement

1.  Peel off the sticker of the battery (PR41 

or 312 zinc-air battery) before loading.

2. Open the battery holder.

3. Insert a PR41 or 312 battery sideways 

into  the  battery  holder. 

You  do  not 

have to worry about the polarity.

4. Close the battery holder.

Battery life 

(PR41 or 312, for continuous use)

Approx. 150 hours

-  Battery life will change depending on the operat-

ing condition.

When  remove  the  battery,  grasp  it 
and pull it towards you. Be sure to 
remove the battery when the hearing 
aid is not to be used for long time.

Inserting Hearing Aid in Your Ear

This  hearing  aid  does  not  have  a  power  switch.  The  battery 
holder also functions as power switch.

Power/OFF: 

Open the battery holder.

Power/ON: 

Close the battery holder firmly.

1.  Open  the  battery  holder  slightly,  so 

that the hearing aid is set to the OFF 
condition.

2. Hold the hearing aid so that the pull-out wire is at the rear, 

lightly pull the auricle back and insert the hearing aid straight 
into the ear.

  Depending on the shape of the user's ear, there may be no 

vent, or the vent may be in a different position.

*  The communication connector serves for adjustment of the 

hearing aid by the hearing aid professional.

Pull the auricle
toward the rear

Sound outlet

Pull-out wire

HOW TO USE YOUR FIRST HEARING AID

  Any hearing aid cannot return level of your hearing to normal or 

halt further hearing deterioration, but proper use of your hearing 
aid can help you hear what is going on around you and let you 
get more enjoyment of life.

  If this is your first hearing aid, you - like most new users - will 

probably be surprised at the loudness of the sounds, and after 
using it for a short while, you may even feel that it is too noisy. The 
following three tips are important in overcoming your concerns.

1)  Read this manual and become familiar with the hearing aid's 

various mechanisms and how to use them correctly.

2)  First, use your hearing aid in a quiet place and listen to quiet 

sounds and give yourself sufficient time to get accustomed to 
the sound of your hearing aid.

3)  If any physical problems develop, consult your doctor.

FOR KEEPING YOUR HEARING AID LONGER

  Always keep the hearing aid clean.

Clean the hearing aid with dry cloth periodically and also remove 
earwax  plugged  in  the  sound  outlet  using  eyebrush  or  tooth-
brush.

  Do not expose the hearing aid to the heat from stoves, etc. Also, 

avoid leaving it in places with high humidity.

  If the hearing aid is dropped in water, wipe with dry cloth and ask 

the dispenser for check.

  Do not pick the microphone with nail, pin, etc., because this may 

damage the microphone.

  Do not disassemble or attempt any repairs by yourself. Ask the 

dispenser for repair.

3-20-41 Higashimotomachi, Kokubunji, Tokyo 185-8533, Japan

HI-G6E

DIGITAL
HEARING AID

Sticker

Microphone

Volume Control

Battery holder

Vent

Communication

connector

Sound outlet

Pull-out wire

"Either way"

circuit

OPERATING INSTRUCTIONS

Parts and Controls

  If the hearing aid is hard to insert 

in a straight motion, slowly rotate 
it in the direction indicated by the 
arrow in the illustration, and lightly 
push it in.

Note:

 If  the  hearing  aid  is  inserted  with  the  battery  holder 

closed (ON), acoustic feedback may occur.

3. When the hearing aid is properly seated in your ear, close the 

battery holder to turn it on.

Open the

battery holder

Rotate in arrow
direction and
lightly push in

Reviews: