• Best results are achieved on hairs that have been shaved a day or
two before treatment or trimmed to 1mm–2mm in length.
• Remove all jewellery in the vicinity of the treatment area.
• Please ensure you have patch tested the area to be treated 24
hours prior to treatment.
STEP 1
Plug Mains Adapter into socket on the Unit
and into the Mains.
STEP 2
Use the Key to unlock the
Keyswitch.
The left Power Level light will
flash green.
STEP 3
Enter “SECURITY KEY PRESS SEQUENCE”
within 60 seconds.
You will find the Security Key Press
Sequence in the User Manual. Please
ensure you read the User Manual before
proceeding.
STEP 4
Use + and - buttons to set power level. Refer
to User Manual for skin types.
If you feel any discomfort reduce the power
level.
If the power level is adjusted the red Enable
light will flash.
STEP 5
Press the Enable Button. The
red Enable light will stay on and
the amber light on the Wand will
illuminate.
STEP 6
When placed on the skin the amber light
will go OFF and the white ‘ready’ light will
illuminate.
STEP 7
Press and HOLD the Laser
Button to start the red laser
treatment. You will hear a series
of high pitch beeps to indicate
the laser is operating. The laser
appears as a small red light.
This must be aimed at the hair ROOT.
Note:
On the lower power levels, the laser will pulse on and off for 4
seconds.
Note:
You may feel a ‘pin prick’ sensation during treatment, however,
most people do not feel anything.
T R E A T M E N T
3
“SECURITY
KEY PRESS
SEQUENCE”
1
5
2
4
6
7
© The Dezac Group Ltd 2014
© The Dezac Group Ltd 2014
© The Dezac Group Ltd 2014
