Operator Manual Rev 2.01
Page 26
AXLE-613-201
Clicker: Small black key fob used for remote id of trucks
Power Supply: 120 VAC Power supply located inside the enclosure near the M12
connectors (see figure 1)
SPECIAL SETTINGS MENU:
Press and Hold Power & F1 together at the same time. This will enter a special
settings menu and should only be done by qualified personnel.
The SEL.TYPE option allows the farm/field selection to be switched from global
(all trucks assigned) to multiple (each truck is assigned) to a single farm and
field.
Press OK Key to enter Menu
Use up/down arrow keys to switch from GLOBAL to MULTIPLE
Press OK to make Selections and then arrow keys to QUIT
MASSBIND:
This Menu allows the pairing of all key fobs in the truckDB file –
Enter the Special settings menu and use arrow keys to navigate to MASSBIND
Press OK to begin key pairing – all keys fobs will need to be pressed in order #1,
#2 etc. until all key fobs have been paired.
DONE will be displayed after each successful key bind and then the next ID will
be displayed along with the message Press Clicker #
Summary of Contents for axleWEIGHr
Page 1: ...L003 507 Reference Manual...
Page 19: ...Operator Manual Rev 2 01 L003 507 V1 2 1 Page 17...
Page 29: ...Notes...
Page 30: ......
