RINSEKIT HYPERHEATER, Instructions Manual

Page: 6 / 12

When you shut off the nozzle, the
hot water inside the heater may
cause the cut out light to
illuminate.
Keep shower nozzle in ON position
during use. Turning the nozzle OFF and
ON repeatedly will cause overheating
and will trigger cut out warning.
The high temp cut out (triggered at 106
degrees F) is designed to prevent the
water from getting too hot.
To reset simply spray the nozzle for 5
seconds. You will see the temperature
drop on the display and the cut out will
automatically reset in 10 seconds.
ADDITIONAL INFORMATION