BEFORE YOU USE THE RV-PRO 360 BY RINNOVISION,
CHECK THE FOLLOWING POINTS:
See our video on
rinnovision.com
Telescopic pole
• Check that it is not crushed, broken, bent, or dented.
• Check that all the sections of the telescopic pole are easily extendable.
• Check that the section locks maintain each section steadily in place.
• Check that the section locks are not damaged, broken, or cracked.
• Check that the threaded end of the telescopic pole is not damaged and that the RV-Pro 360 easily screws
on. Do not use excessive force when screwing the RV-Pro 360 on as this could damage the threads.
RV-Pro 360
• Check that the RV-Pro 360 turns on and off properly; press
the power button once to turn it on and a second time to turn it off.
• Make sure every LED of the RV-Pro 360 properly functions during
the on-and-off procedure.
• Check that the RV-Pro 360 is not damaged, broken, cracked,
or dented and that there are no loose pieces.
• Check that the camera protection guide is fixed steadily in place.
GoPro Max
• Check that the GoPro MAX is turned on.
• Check that the GoPro MAX is not damaged, broken, or cracked.
• Make sure you remove the protective lens before recording.
• Make sure that the lens of the GoPro Max are not scratched.
• Check the charge left in the battery.
• Check the current condition of the recording device.
• Verify that GPS activation is turned on before the recording.
• The tablet supplied in the RV-Pro 360 case allows you to see,
in real time
, the images from the GoPro Max camera. However, due
to some camera updates, viewing on the tablet may not work while
the camera is in recording mode.
2
USER GUIDELINE
RV-PRO 360 BY RINNOVISION
This product contains a High-capacity lithium-ion battery.
• It is forbidden to ship this product with the battery
charged at more than 30%. To ensure security,
drain the battery before shipping.
• If this product is not used for more than three (3)
months, drain the battery completely and recharge
for one (1) hour.
• When shipping, a sticker with the label UN3481 must
be on the package with the number 1-833-230-4040.
• Working temperature: -20°C to +40°C
• Charging temperature: 0°C to +40°C
• Storage temperature: -20°C to +50°C
Charging
connector
Power
button
BATTERY
