Symmetry RDV3611 installation guide 11156-H 08-21 |
11
Mounting bracket installation
Install the four mounting brackets supplied onto the unit. The position of the thickness will depend
on the cladding thickness and the type of installation (framed or frameless).
The Symmetry can be installed with granite and metal
frames, and also as a frameless installation. The
frameless installation can have brick, rock veneer, or
tiles—these will sit tight up against the framing plate of
the fire.
The metal mounting brackets can be adjusted (20 mm)
to allow for the different cladding thicknesses.
Granite or metal
frame
Bracket is in the
forward position and
the backing board is
around the framing
plate.
Brick or tile installation
Note the depth of the
brick recess. The bracket
is in the middle position
and the front face of the
backing board is level
with the back face of the
framing plate.
Frameless brick or tile
installation
Note the cutaway in the
brick for a shallower
recess. The bracket
is in the back position
with the front face of the
backing board sitting
behind the framing plate.
