Rinnai RSEP1S25N, Installation And Operation Manual

Page: 34 / 40

34
SE+ Series Infrared Gas Heater Installation and Operation Manual
22. HIGH ALTITUDE INSTALLATION / DERATION
This heater not to be installed at altitude above 6,800 feet.
USA: The factory installed orifice for this appliance is approved for altitudes zero to 2000 feet above
sea level. When installed above 2000 feet , refer to information below .
When this appliance is installed above the standard altitude stipulated the input must be de - rated by 4%
for each 1000 ft above sea level. The orifice must be changed according to the chart below - confirm
the correct model. Check with your local utility regarding the gas supply and the de - rating of this appli-
ance.
1
Per ANSI Z223.1 (NFPA 54)
MODEL
USA ORIFICE DERATION
FOR USE AT ALTITUDES ABOVE (FEET)
Gas Orifice Drill Size
1
/ Part #
Supplied USA Only
0 > 2000 > 3000 > 4000 > 5000 > 6000
DO NOT
INSTALL AT
ALTITUDE ABOVE
6,800 FEET
RSEP1S25N (NG)
45 DMS 46 DMS 2 MM 47 DMS 48 DMS 48 DMS
906000140 906000141 906000153 906000163 906000164 906000164
RSEP1S25P (LPG)
54 DMS 54 DMS 55 DMS 55 DMS 55 DMS 55 DMS
906000144 906000144 906000170 906000170 906000170 906000170
RSEP1S35N (NG)
38 DMS 39 DMS 40 DMS 41 DMS 41 DMS 42 DMS
906000025 906000157 906000138 906000159 906000159 906000160
RSEP1S35P (LPG)
50 DMS 51 DMS 51 DMS 51 DMS 51 DMS 52 DMS
906000026 906000142 906000142 906000142 906000142 906000167
RSEP2S50N (NG)
31 DMS 32 DMS 32 DMS 32 DMS 33 DMS 34 DMS
906000137 906000154 906000154 906000154 906000155 906000156