Rinnai
9
Split AC OM
AUTO OPERATION
In this mode, the fan speed, heating / cooling and the temperature are all adjusted
automatically by the appliance, based on the current room temperature.
1�
Press to turn on the power.
2�
Press the “MODE” button until “AUTO” is shown on the LCD screen.
3� To cancel the “AUTO” mode an return the appliance to manual control select
another mode�
The table below describes the relationship between room temperature and the modes of operation when the
appliance when set to Auto Operation mode.
Room Temperature
Set Temperature
Operation Mode
≥ 27°C
24°C
Cooling Mode
20°C ~ 27°C
24°C
Dry Mode
≤ 20°C
24°C
Heating Mode
NOTE
In this mode, you cannot adjust the temperature, however the SWING operations for air direction
can still be selected.
ROOM TEMPERATURE DISPLAY
The remote control is cable of displaying either the set temperature or the current
ambient room temperature�
1�
To display the current room temperature, press the "ROOM °C" button once.
"ROOM" is shown on the LCD screen and the temperature digits display the
current room temperature�
2�
To display the current set temperature, press the "ROOM °C" button again.
"SET" is shown on the LCD screen and the temperature digits display the
current set temperature�
NOTE
The "SET" temperature display is the default display for the remote control and will be reset when
the controller is turned off and on.
AUTO
COOL DRY HEAT FAN
SPEED
TURBO HIGH
MID
LOW AUTO
TIMER
ON OFF
ROOM
SET
C
F
h
SWING
SWING
ON
OFF
SLEEP iClean HEALTH iFavor
Anti-FUNGAS DISPLAY LOCK
AUTO
COOL
DRY HEAT FAN
SPEED
TURBO HIGH
MID
LOW AUTO
TIMER
ON OFF
ROOM
SET
C
F
h
SWING
SWING
ON
OFF
SLEEP iClean HEALTH iFavor
Anti-FUNGAS DISPLAY LOCK
BASIC OPERATION
