17
Connect the main power cable (provided)
from the plasma filter to the main power
socket on the wall. (Fig.8.3)
Switch ON the extractor hood to activate the
plasma filter. Air flow will pass through a
sensor to activate the plasma filter
automatically. It may take approximately 20
to 30 seconds to activate the plasma filter.
An audio signal will sound to indicate that
the plasma filter is now switch ON.
Attaching the Flue Ducts
Step 4
(Fig.9, Fig.9.1, Fig.9.2)
Secure the mounting bracket onto
the screws firmly 1 & 2 and place the
outer flue duct onto the appliances.
(Fig. 9).
Slide the outer flue duct section
downwards, attached it to the left
and right of the retaining bracket to
engage it. (Fig. 9)
Note:
To prevent scratches, lay paper over the edges of the lower flue duct to protect the
surface.
Slide the inner flue duct to the
required height and mark where the
screws should be inserted and drill
8mm diameter holes to a depth of
40mm and secure the mounting
bracket onto the screws provided.
(Fig. 9.1)
Fig.9
Upper Chimney
Bracket 1
Lower Chimney
Bracket 2
L
o
w
e
r
C
h
i
m
n
e
y
L
o
w
e
r
C
h
i
m
n
e
y
Fig.9.1
Fig.8.3
Summary of Contents for RH-C1059-PBR
Page 1: ... WUDFWRU QQF QVWUXFWLRQ QVWDOODWLRQ 0DQXDO 4 2 4 ...
Page 21: ......
Page 22: ......
Page 23: ......