Rinnai Boil & Brew: Owner and installer guide: 20830-C 03-18
|
5
Safety
Maintenance
The usage of the unit will determine the
quantity of scale build up.
Hot water systems, like cars, require regular
maintenance and servicing. To ensure
longevity and optimum performance of your
unit we recommend annual inspection and
servicing.
The front cover and spout will require a
periodic wipe to clean any marks/splashes
from use.
Rinnai has a maintenance,
service and spare parts
network with personnel who
are fully trained and equipped
to give you the best advice on
your Rinnai product. Regular
maintenance and servicing is
not covered by the Rinnai warranty.
For help locating a service person in your area
call 0800 RINNAI (0800 746 624).
Front cover
Do not remove the front cover as this will
expose 230 V wiring and must only be
removed by an authorised person.
Damaged components
If any component is damaged it must be
replaced by an authorised person using Rinnai
replacement parts.
Hot water
The water dispensed will at times be boiling
or close to boiling, due caution must be taken
when using the system.
Child supervision
Children should be supervised to ensure they
do not play with any part of the hot water
system.
Supply cord for the 5, 10, and 15 L units
If the supply cord is damaged it must be
replaced by a licensed tradesperson in order
to avoid a hazard. This must be a genuine
replacement part available from Rinnai.
Safety devices
The Rinnai Boil & Brew is fitted with the
following safety devices:
• Automatic thermostat to maintain water
temperature
• Temperature override cutout for heating
element
• Water level control (ball cock)
• Water overflow protection
Do not operate the system unless all of the
safety devices are fitted and working Do not
tamper or remove any of these devices.
