8
WARNING!
* Install the built-in hob in a well ventilated room and keep it away from any combustible
or flammable objects such as paper or oil.
* Place the built-in hob on a stable and levelled surface.
* If the built-in hob is to be installed close to combustible objects (such as wooden walls,
wooden shelves), it should be installed at least 15 cm from the side walls. Even if the
combustible material is protected by stainless steel sheet, a clearance of 15 cm must be
maintained too. If the surrounding material is fireproof, 15 cm clearance is not required.
The clearance between the appliance and above combustible shelves or the ceiling
must be at least 100 cm.
●
If the separator is placed underneath the hob, its distance shall be recommended to be kept more
than 150mm away from the surface of kitchen worktop. Please refer to below diagram.
●
Adjust
screw
position
as
bench
cut
out
size.
●
Confirm that four screws are secured firmly into the casing.
1000mm (min)
150mm (min)
150mm (min)
150mm (min)
Screw
Table
Casing
Screw
150mm (min)