– 3 –
* If another built-in appliance (e.g. dishwasher, washer, etc,) is to be installed under the built-in hob, keep a
clearance of at least 10mm from the bottom of the built-in hob. If the installation of the appliance underneath
requires a different distance, adopt the larger value.
若在嵌入式平面爐下安裝其他器具 ( 如洗碗碟機﹑洗衣機等 )
。請保留最少
10
毫米的距離。
若其他器具的安裝指引要求不同的間距 , 應採用較大者。
* The built-in hob should be installed with a distance of more than 15cm away from surrounding combustible
materials.
此爐具的安裝位置應與週圍易燃物料距離
15
厘米以上。
* If the built-in hob is to be installed on top of a built-in oven, a partition between two appliances is required
with all gaps being sealed. It is to avoid the infl uence of air draught on the operation of the built-in hob
when the oven fan is running.
煮食爐下方如設有嵌入式焗爐 , 必須加裝隔層板並將所有縫隙密封 , 避免焗爐的風機氣流影響煮
食爐運作。
* In case that a partition plate is installed underneath the appliance, keep space by at least 10 cm in between.
若隔層板被安裝在器具下，請確保保持至少 10 釐米的空隙。
* Make sure that the following parts are fi tted properly before use:
使用前請確定以下配件已置於正確位置 :
1. Pan Support
爐架
Fit Pan Support into Glass Top Plate.
爐架正確地安放於玻璃面板上。
2. Burner Head, Burner Body
爐頭 , 爐體
Set back holes of Burner Body with Electrode Fixing place.
Then insert Burner Head Pin to top holes of Burner Body.
將爐體後的開孔對準點火針安裝位置。然後將爐頭腳插入爐體面上的
插孔。
Fit Burner Head into Burner Body properly without gap. See the right illustration as below.
爐頭放置在爐體上 ,
放置時請勿傾斜。 如下圖。
Burner Head-S
爐頭 -
S
Sparks Electrode
點火針
Safety Sensor
安全感應頭
Safety Sensor
安全感應頭
Sparks Electrode
點火針
Burner Head-SS
爐頭 -
SS
Gap
空隙
Gap
空隙
RB-12S-C.indd Sec1:3
RB-12S-C.indd Sec1:3
2/10/2009 9:30:49 AM
2/10/2009 9:30:49 AM