Rinnai PoloCool EX10C, Operation & Installation Manual

Page: 24 / 36

Page 24
Remote Control
Timer
(TIMER) TIMER FUNCTION
[(9]
The Timer Function is used to set the ON or OFF time interval of the unit.
This function can only be set using the remote control.
Timer ON and Timer OFF can not be set concurrently, only one or the other can be set at any one time.
The air conditioner must be running in the desired operating settings before selecting either the Timer ON
or Timer OFF function, for example Cooling Mode, 25
°
C Target Temperature, Fan Speed high.
In both timer modes the time interval can be incremented by 30 minutes from 1-10 hours.
Between 10-24 hours, the time interval can be incremented by 1 hour.
In an event of power failure the timer interval will need to be reprogrammed.
TIMERON �
This function is used to start the unit after a specific time interval.
To set the ON time:
1. The unit must be running in the desired operating settings under which you want the
unit to run when it starts up after the selected time interval has elapsed.
2. Press the ON/OFF button on the remote to switch the unit in STANDBY mode.
3. Press the TIMER button; the remote handset will display the time icon and
ON next to it.
4. Press the TIMER button once; the clock display will come up and continue to flash
next to the ON time icon.
5. Set the time interval after which you want the unit to be turned ON using the UP/
DOWN
button.
-
� - ­
/"Gi
(�
'���)
(
�· '
6. Once the selected time interval is set press the TIMER button again to store the time interval in the memory.
7. The unit will start operating in the mode selected when the preset time is reached.
8. To cancel the timer setting, press the TIMER button.
TIMEROFF �
This function is used to turn OFF the unit after a specific time interval.
To set the OFF time:
1. The unit must be running in the desired operating settings under which you want the
unit to run during the specified time interval.
2. Press the TIMER button once; the clock display will come up and continue to flash
next to the ON time icon.
3. Set the time interval after which you want the unit to be turned OFF using the
UP/DOWN button.
4. Once the selected time is set press the TIMER button again to store the off time
interval in the memory.
5. The unit will be turned OFF when the preset time is reached and will be in standby
mode.
6. To cancel the timer setting, press the TIMER button.
13
-
..
C£
'gj(
r.
,��:�1 r ; "'
by
by