Rinnai POLO PC47C, Operation & Installation Manual

Page: 21 / 32

21
SWITCH THE UNIT OF TEMPERATURE
y
When the appliance is running, press the button on the remote control, (or with the
INCREASE
and
DECREASE
buttons on the control panel selected together for 3 seconds at the same time), then you can change the unit of temperature.
For example:
Before change, in cool mode, the screen display (Fig 1).
After change, in cool mode, the screen display (Fig 2).
SMART MODE
The appliance automatically chooses whether to operate in cool, fan or heat (certain models only) mode.
To set this mode correctly:
y
Press the “ ” remote control button or “ ” control panel button a number of times until the screen shows as below:
It is in AUTO mode when the display is running in circular motion.
y
Select the required fan speed by pressing the
FAN
button.
y
Four speeds are available: High / Medium / Low / Auto.
y
If the appliance is a cooling only model, the unit operates in Fan mode when the room temperature is below 23° C(73° F),
and Cool mode when the room temperature is above 23° C (73° F).
y
If the appliance is cooling and heating model, the unit operates in Heat mode when the room temperature is below 20° C
(68° F), and Fan mode when the room temperature is from 20° C (68° F) to 23° C(73° F), and Cool mode when the room
temperature is above 23° C (73° F).