8
|
iHeat operation guide: 12063-A 01-13
Reviewing one day’s schedule
1. Press ‘More’.
2. Press ‘Schedule’.
3. Use the up and down keys to
change the flashing day.
4. Press ‘View’.
5. Use the up and down keys to
cycle through the scheduled
periods.
To make any changes during
review press ‘Edit’.
Setting the calendar
This should have been done by
your installer as this is the first
setting required to be set once the
thermostat has been powered up
for the first time.
If for some reason this needs
to be done again—refer to the
‘Advanced Settings’ section.
To adjust the time
1. Press ‘More’.
2. Press ‘Clock’.
3. Use up and down keys to set
the time.
4. Press ‘Done’.
Override
Overrides the timer setting. For
example, the house while everyone
is away (unoccp1) is set to 18 °C
until 5:30pm, but you’ve come
home from work at midday and
would like the house to be warmer.
1. Press ‘Override’. The override
settings will default to
those contained in the next
occupied period.
2. Use the up and down keys to
change the override time and
temperature.
3. Press ‘Done’ to save the
setting.
4. Override will continuously
flash on the screen to indicate
the thermostat is in ‘Override’
mode.
5. To revert back to the set
timers, press ‘Cancel’, or wait
until the ‘Hold Until’ time has
been reached.
Holiday
Holiday changes the temperature
setting for a set number of days.
Typically you would set a low
temperature to stop the system
from coming on.
1. Press ‘More’.
2. Press ‘Holiday’. The
temperature on the screen
flashes.
3. Use the up and down keys to
change the temperature for
the duration of the holiday.
4. Press ‘Next’. The screen
shows ‘Hold Until x days’, and
‘Holiday’ flashes on the screen
to show that it is in ‘Holiday’
mode.
When the number of holiday days
has finished, the screen will display
‘Following Schedule’ to indicate
that the holiday mode has ended.
If you wish to cancel holiday mode
before the set number of days has
completed, press ‘Cancel’.
