manualshive.com logo in svg

Rinnai HINRA20M, Owner'S Manual

Share
Download
Rinnai HINRA20M Owner'S Manual Download Page 11

Rinnai 11 

Split AC OM

Filter Reminder (where fitted)

After 240 hours of use, the display window on the indoor unit will flash 

CL

. This is a reminder to clean your filter. 

After 15 seconds, the unit will revert to its previous display�
To reset the reminder, press the LED button on your remote control 4 times, or press the Manual Control button 3 

times� If you do not reset the reminder, the 

CL

 indicator will flash again when you restart the unit. 

Filter Replacement Reminder (where fitted)

After 2,880 hours of use, the display window on the indoor unit will flash 

nf

� This is a reminder to replace your 

filter. After 15 seconds, the unit will revert to its previously display. 

To reset the reminder, press the LED button on your remote control 4 times, or press the Manual Control button 3 

times� If you do not reset the reminder, the 

nf

 indicator will flash again when you restart the unit.

CLEANING THE OUTDOOR UNIT

The outdoor (condensing) unit draws air into the unit and dissipates it away from the appliance� Periodic inspection 

is required to ensure vegetation has not grown around the unit (plants, weeds etc�)�
The cabinet should be kept clean and have the recommended clearances maintained� Ensure the discharge air is 

free to dissipate and under no circumstances recirculates back into the unit�
Ensure there is no water build up (including from condensate drain) on or around the unit�

NOTE

Any maintenance and cleaning of the outdoor unit should be performed by an authorised dealer 

or licensed service provider.
Any unit repairs should be performed by an authorized dealer or licensed service provider.

GENERAL MAINTENANCE

Maintenance - For Prolonged Periods of Non Use

If you plan not to use your air conditioner for an extended period of time, do the following�

• 

Clean all filters

• 

Turn ON Fan function until unit dries out completely

• 

Turn off the unit and disconnect the power

• 

Remove batteries from remote control

Maintenance - Pre-Season Inspection

After long periods of non-use, or before periods of frequent use, do the following:

• 

Check for damaged wires

• 

Clean all filters

• 

Check for leaks

• 

Replace batteries

• 

Make sure nothing is blocking all air inlets and outlets of both the indoor or outdoor units

CARE & MAINTENANCE

Summary of Contents for HINRA20M





















Reviews:

No comments

Brands by name

Popular brands

Load more brands