Evolve 950 Installation Guide: 12471-A 01-14
|
5
Specification
Evolve 950
™
Specification summary
Input
= 10-34 MJ/h
Output
= 2.4-8.13* kW
Efficiency
= 86% (on high)
Heating area
= 82-125 m
2
**
Gas type
= NG or ULPG
Inbuilt exhaust balance flued
convection flame fire with electronic
temperature control, timer and
remote.
Suitability
Ideal for living rooms and open plan
areas. Versatile power flue system
makes for easy installation in almost
any living space, including bedrooms.
The Evolve is ideal for a new build
installation into a false (mock)
chimney.
Data plate
Located inside the appliance, upper
right hand side.
Convection fan
2-speed centrifugal, double diameter
160 x 180 mm.
Gas connection
½ “ BSP, the gas supply terminates
inside the heater—lower left hand
side of the appliance.
Ignition
Continuous spark electronic ignition.
Installation considerations
Room size—smaller rooms will heat
up quickly, and due to the efficiency
of the appliance, the heater (if auto
off is selected) will turn to a low flame
setting once the set temperature has
been reached.
Noise level -
37-45 dB(A)
Power flue
Inner 50 mm, outer 70~80 mm.
Appliance must be installed with a
Rinnai flue system.
Power consumption and electrical
supply
High
= 160 W
Standby = <8 W
This heater has a 1.5 m power cord
with a three pin plug supplied. The
power cord passes through a slot in
the back right hand corner of the
appliance.
Safety devices
Flame failure sensing system,
pressure relief, overheat safety
switch, air temperature sensor,
thermal fuse, overcurrent fuse, and
spark detector.
Temperature control
Thermostatic, temperature control
range 16-26 °C.
Weight
- 75 kg
* Will vary according to gas type and flue configuration ** Will vary depending on geographical location in NZ
Dimensions are in mm.
1070
660
430
65
500 ±25
420
960
560
568
25
25