Rinnai Australia
3
Operation Manual
HOW TO OPERATE THE HEATER
HEATER OPERATION
To turn the heater on and set the heating level:
Ensure heater is plugged in and the power socket outlet is switched on.
1. Turn the main power switch
located on the right hand side of the appliance, to the ON ‘I’ position.
2. Adjust the heating dial
to the desired numeric heating level
. The heating operation indicator
will
illuminate to indicate the heater is now in operation.
3. Allow the room to reach the desired comfort level.
4. Once the room has achieved the desired level of comfort the thermostatic control will then cycle the heater on
and off as required to maintain the set comfort level.
5. If the selected comfort level temperature is cooler than desired, select a higher setting on the heating control
dial .
6. If the selected comfort level temperature is warmer than desired, select a lower setting on the heating control
dial .
7. To stop heater operation completely turn the main power switch
located on the right hand side of the
appliance, to the OFF ‘0’ position.
The graduated comfort zone settings
on the heating control dial provide a quick user reference
for choosing an appropriate heating level.
Levels 3 to 6 indicate the Comfort Zone in which most standard evironments will have a generally
comfortable level of heating.
Time taken to reach the desired comfort level may vary from room to room, due to factors such as:
Building construction type, Building insulation level, Room size, Ceiling Height, Number of
windows and window furnishings & The amount of furniture and other fixtures within the room.
3
4
5
6
A
A
4
5
10
1
8
2
3
7
6
9
1
2
4
3
NOTE
5
NOTE
2
2
1
