Rinnai EHP-WH110, User'S And Installer'S Manual

Page: 17 / 48

17
2.4.3 Access to the front part
To access the refrigerant circuit and the electrical panel components of the
unit, you will need to open the front panel by removing the screws located on
the side and then extracting it as indicated in the below picture.
2.4.4 Access to the bottom part
You need to access to the bottom part of the unit for any eventual control/
replacement of the manual reset safety thermostat, electric heater,
magnesium anode and for the wiring of the remote switch ON-OFF contact.
Twist off the 6 screws that hold the bottom central plate and remove the
cover
1. Manual reset thermostat
2. Electric heater and magnesium anode
1
2