Rinnai Tankless Water Heater Installation and Operation Manual
24
3.
Insert the top bracket into the wall mounting
bracket. Make sure the wall mounting bracket
is attached to the wall and can hold the weight
of the boiler before you fully let go.
4.4 Mount the Water Heater to the Wall
4.4.1 Mount the Internal
(Indoor) Water Heater
You Will Need:
• Rinnai Tankless Water Heater
(Internal/Indoor Model)
• Wall Mounting Bracket
Supplied by Installer:
•
Level
•
4 Screws for mounting bracket installation
Use appropriate screws for type of wall
constructions.
Instructions:
1.
Hold the wall mounting bracket up against the
wall and use a level to make sure the bracket
is even. Proper orientation requires the water
heater to be level.
2.
Use four screws to secure the wall mounting
bracket to the wall (two screws on the far left
side and two screws on the far right side).
Use the appropriate screws for the wall
construction to secure the mounting bracket to
the wall between two studs.
Figure 9: Level the bracket
Figure 10: Secure the bracket
Figure 11: Mount the top bracket
