Composite recess box installation guide:10847-D 04-18
|
7
Flange
Render
Brick
Spacer
Top view
Secured internally - side wall
Secure the recess box into a solid fixture through the
side walls using suitable fasteners.
The excess space between the side walls of the recess
box and the solid fixture may require packing to
prevent distortion of the recess box.
At least two fasteners should be used through each
side wall, approximately 125 mm from the inside of
the top and horizontal faces of the recess box.
Installing to rendered surfaces
Use spacers (not provided) to install the recess box, leaving sufficient clearance for rendering.
When the render is applied ensure that the gap provided by the standoff spacers is not exceeded
as this will prevent the cover from being fitted.
~ 125 mm
~ 125 mm
