Rinnai 14
Multi Split Type AC OM
MANUAL OPERATION – MODE SELECTION
While two or more indoor units are simultaneously operating, make sure the modes do not conflict with each
other. The heat mode claims precedence over all other modes. If the unit initially started to operate in HEAT
mode, the other units can operate in HEAT mode only. For example: If the unit initially started operates under
COOL (or FAN) mode, the other units can operate under any mode except HEAT.
If one of the units selects HEAT mode, the other operating units will stop operation and display ”--” (for units with
display window only) or the auto and operation indication light will flash rapidly, the defrost indication light will
turn off, and the timer indication light will remain on (for units without a display window).
Alternatively, the defrost and alarm indication light (if applicable) will light up, or the operation indication light will
flash rapidly, and the timer indication light will turn off (for the floor and standing type).
OPTIMAL OPERATION
To achieve optimal performance, please note the following:
•
Adjust the direction of the air flow so that it is not blowing directly on people.
•
Adjust the temperature to achieve the highest possible level of comfort.
DO NOT
adjust the unit to
excessive temperature levels.
•
Close doors and windows in COOL mode or HEAT mode.
•
Use the TIMER ON button on the remote controller to select a time you want to start your air conditioner.
•
DO NOT
place any object near the air inlet or air outlet, as the efficiency of the air conditioner may be
reduced and the air conditioner may stop running.
•
Clean the air filter periodically, otherwise cooling or heating performance may be reduced.
•
DO NOT
operate unit with horizontal louvre in closed position.
RECOMMENDED
For units that feature an electric heater, when the outside ambient temperature is below 0°C, it is
strongly recommended that you to keep the machine plugged in so as to guarantee smooth operation.
OPERATION
