Rinnai 22
Touch Wi-Fi Kit IM
Wi-Fi MODULE ERROR CODES
The Touch Wi-Fi Module error codes will not disrupt operation of your appliance and may clear after some time. A list of possible error
codes is given below:
Error
Code
Wi-Fi Indicator
Flashes
Description
Corrective Action
50
1
No configuration data detected.
Replace the module.
51
3
Touch Wi-Fi Module configuration error.
Check SSID/password entry otherwise replace the module.
52
3
The Touch Wi-Fi Module will try to connect to
the assigned Wi-Fi Router for a duration of 3
minutes. If after 30 seconds the assigned Wi-Fi
Router cannot be located this code is registered.
Check the Wi-Fi Router and check the distance between the
Wi-Fi Router and Touch Wi-Fi Module.
53
N/A
The Touch Wi-Fi Module has switched over to
its configuration mode as it could not locate the
assigned Wi-Fi Router.
Look for this fault code when the Wi-Fi Router has been replaced
and the Touch Wi-Fi Module cannot be safely accessed to
manually put it back into its configuration mode.
54
N/A
The Touch Wi-Fi Module has been forced to
operate in its configuration mode because it is
yet to be configured.
The Touch Wi-Fi Module is yet to be configured to connect to a
Wi-Fi Router and so will operate in its configuration mode until
configured.
55
4
Internal Type 1 communication error.
This error will not allow the Touch Wi-Fi Module initial
configuration or system access in-house. If the problem persists
replace the Touch Wi-Fi Module.
56
5
Internal Type 2 communication error.
This error will not allow system access in-house. If the problem
persists replace the Touch Wi-Fi Module.
57
2
Remote access error – Security type 1 error.
This error will not allow system access out of house. If the
problem persists replace the Touch Wi-Fi Module.
58
Remote access error – Security type 2 error.
59
6
Server type 1 configuration error.
This error will not allow system access out of house. If the
problem persists replace the Touch Wi-Fi Module.
60
7
Server type 2 error.
This error will not allow system access out of house. If the
problem persists replace the Touch Wi-Fi Module.
61
7
Server type 2 connection type 1 error.
This error will not allow system access out of house. If the
problem persists replace the Touch Wi-Fi Module.
62
Server type 2 connection type 2 error.