Rinnai
22
RDV 600_700 OIM
HEATER LOCATION
GENERAL LOCATION INFORMATION
•
When positioning the heater, the main
variables governing the location are Flueing
and Warm Air Distribution.
•
This heater
MUST NOT
be installed where
curtains or other combustible materials
could come into contact with it. In some
cases curtains may need restraining.
Refer
to the warnings on page 6 for clearances
to furnishings, adjacent walls, curtains
and combustibles.
•
Mantles and surrounds can be added to
compliment the design provided that they
conform to the clearances shown in the
diagrams below.
•
"The minimum clearance from the edge of
the appliance glass is 200mm on the sides
and 300mm above.
The depth of the mantle / surround at the
minimum clearance may not exceed
150mm (as shown right).
•
An additional 100 mm of clearance is
required for every extra 50 mm of mantle
depth, i.e. for a 200 mm deep mantle the
minimum clearance is 400 mm.
TV AND ORNAMENTATION WARNING
ENCLOSURE REQUIREMENTS
Masonry Fireplace
The appliance must be positioned within the fireplace on a flat level surface.
If the appliance is elevated from the ground within the structure, a base must be constructed using suitable material
with supporting joists capable of supporting a minimum of 1.5 times the weight of the appliance.
INSTALLATION OF TV OR ORNAMENTATION ABOVE THE HEATER
The installation of electrical appliances above and in the vicinity of the heater such as, but not
limited to, Plasma TV, LCD TV, Home Theatre Screens, Speakers, etc must comply with their
manufacturers' instructions.
It is the responsibility of the installer/end-user to check the installation instructions of these items
and to ensure the location is suitable.
This caution also extends to, but is not limited to, ornaments such as: Paintings, Prints,
Photographs, Tapestries, Mirrors, Stuffed Animals, etc.
Please note the recommended clearances as per the diagram above.
The temperature of the wall surface directly above the appliance may be elevated and may
discolour paint finishes or distort vinyl wall coverings. For durability of surfaces you should
contact the relevant manufacturer for their specification.
Use either a shelf or mantle below the TV or ornament or alternately you can construct a recess to
mount TV or ornament in.
Check the manufacturers installation instructions for these items and ensure the recess is
suitable.
Rinnai does not take any responsibility for any damage occurring to any items installed above and
in the vicinity of the heater.
750mm
1000mm
200mm
200mm
Maximum mantle depth (at 300mm) = 150mm
Note: The three sided fascia shown for illustrative purposes
300mm
CAUTION
IDEA
NOTE