ring Smoke/CO Listener, Quick Start Manual, Page: 7 / 18

Smoke and CO notifications for
Ring Alarm.
Ring Smoke/CO Listener is a smart sound
sensor for Ring Alarm. It does not sense
smoke or CO directly. Instead, it adds
smart features to your UL listed smoke,
CO, or smoke & CO alarm.
When your smoke or CO alarm begins
to sound, the Listener activates and Ring
Alarm notifies you of the issue. If your
system is professionally monitored, our
monitoring center is also notified.
Is your smoke or CO alarm ready?
Your new Listener depends on the
proper functioning of your smoke or
CO alarm. Smoke and CO alarms have
finite lifespans and some require regular
battery changes. Be sure to follow the
manufacturer’s maintenance guidelines.
Contents
1.
Diagram
2.
In-app Setup
3.
Physical Installation
4.
Additional Information
Begin the setup process near
your Ring Alarm Base Station.
To add devices to your Ring Alarm, it must
be disarmed. If your Ring Alarm is armed,
please disarm it now.
In the Ring app, tap Set Up a Device and
find Ring Smoke & CO Listener in the
Security Devices menu.
To complete the setup process, follow the
in-app instructions.
When prompted, scan the QR
Code or enter the PIN.
This begins the pairing process. The QR
Code and PIN are on the back of your
Listener and in the product packaging.
Diagram When prompted, pull out
the clear tab.
This turns the Listener on. Your Alarm
Base Station then finds it automatically.
As the Listener pairs to your Alarm Base
Station, its LED ring blinks slowly, then
quickly. Once it pairs, the LED glows blue
for three seconds.
If the Listener does not pair successfully,
the LED ring glows red. To try the pairing
process again, remove and reinstall the
battery inside the Listener.
Smoke/CO Listener
For Ring Alarm
1.
Say hello to
your Ring
Smoke/CO
Listener.
Mounting
bracket
Microphone
LED ring
Setup button
2.
Set up your
Ring Smoke/
CO Listener in
the Ring app.