User Manual
Baby MUM RB102
EN
8
Key and LED functions:
3. Operation
Power On / Off Parent Unit
After insert the battery into the parent unit, the unit will wake up immediately. If it has
no response, it may be due to the battery power too low and need to charge up at least
8 hours. When battery is charged up, press and hold the power key, you can fi nd the
power LED light up, then release the key and wait for linking to baby. By press and hold
the power key for two seconds, then the power LED turns off .
Power On / Off Baby Unit
There is no power key on baby unit, just insert DC power jack to turn the unit on and
un-plug to off .
Crying Sound Level LED
Once you have set up your Baby Monitor, you will be able to hear the sounds in your
baby’s room through the Parent Unit. You will also be able to see the sound level LED,
which fl ash rapidly, the louder the noise.
1. Power
2. VOL+
3. VOL-
4. Power and Charge LED
5. Link Indicator
6. Crying Level
7. Power LED
Power On/Off button
Turn the unit power On or power Off by press and hold.
Volume Up button
Volume Down Button
Indicate Power On / Off and Charge Status
- Light up steady is power on. Flash is under charging
It blinks if the unit is out of range. Steady on is linking to baby unit
Cry louder then fl ash faster
Turns on as DC Power present
RECEIVER
BABY UNIT
