Rimage Prism CDPR11, User Manual, Page: 7 / 27

Introduction
Introduction
This manual provides the information needed to set up, install, and operate the Prism Plus printer
and to identify the parts.
Operating system requirements
The Rimage Prism Plus is compatible only with Windows 2000, Windows XP, and Windows 2003
Server. It requires one USB port.
Media requirements
You must use discs that are coated with a surface designed for thermal printing. Silver lacquer
discs without an additional thermal protective layer are not designed for thermal printing. The heat
of the thermal printing process may damage the dye layer in a CD-R.
The media in Rimage Media Kits™ is designed for optimum use in the Prism Plus . For information
about Rimage Media Kits
™
– convenient packages of discs and ribbons, all guaranteed by
Rimage – contact Rimage at 800-445-8288.
Ribbon requirements
The Prism Plus requires ribbons designed specifically for use with the printer. The table below lists
the type of ribbon to use with your printer.
Ribbon Color Part Number Number of Discs Printed
Black 201737-006 2100
Red 202082-002 2100
Midnight Blue 203217-001 2100
Multicolor 202506-001 500
Store the ribbons at -5
°
C (23
°
F) to 40
°
C (104
°
F) and at 30-80% relative humidity, non-
condensing. Avoid direct sunlight.
Label design requirements
Properties Image Size
Resolution 300x300 DPI
Width 5.12” (1536 pixels)
Height 4.52” (1356 pixels)
110635_G 1