Rimage Corporation
Page 36
Allegro 20 Disc Publishing System Service Manual
20.5
Fold and crease carrier flex pc in locations shown. Place holes onto tiny tabs on bracket. Plug
alignment sensor in. Place new carrier flex pc into frame.
20.6
When reassembling carrier be sure to snap end of quad sensor carrier bracket onto tab on
frame before replacing screw. Be sure to route alignment sensor wires behind tab before
replacing 4 screws securing both frames together. Be sure bottom corners of carrier flex pc are
pinched between both frames.
Fold
Fold
Tabs
Snap
Wires Behind
Pinched
