Rimage 2000i Series II, User Manual

Page: 16 / 161

13
For more information visit rimage.com/support
2002760_A
Regular preventative maintenance of your Rimage 2000i can help to ensure
error-free recordings and clean printed labels. Maintenance involves
cleaning the system, cleaning the ink cartridges, and replacing the fan filter.
Use the information in this section to keep your Rimage 2000i in optimum
operating condition.
n
Caution: To avoid damaging the Rimage 2000i during maintenance:
• Never use oils, silicone, or other lubricants on any part of your
Rimage 2000i.
• Use only non-abrasive cleaners to wipe down the surfaces of your
Rimage 2000i.
• Do not pour cleaner directly onto your Rimage 2000i. Instead, apply
the cleaner to a lint-free cloth first.
• When you spray compressed air, make sure that no liquid drips into
your system.
Preventative Maintenance Schedule
Important! Failure to follow the maintenance schedule may void your
warranty.
Materials Task Frequency
Mandatory
Lint-free cloth
Non-abrasive,
all-purpose
cleaner
1. With the Rimage 2000i
powered on, place your hand
next to the fan to make sure
that the fan is operating.
If you do not feel air blowing,
the fan is not operating and
must be replaced. Contact
your Rimage reseller.
2. Power off the Rimage 2000i .
3. Disconnect the power cord .
4. Wipe down all exterior
surfaces of the autoloader.
Weekly
Tip: Your system
may require
more frequent
maintenance
if it is used in a
dusty area, such
as a store or
warehouse.
Dry, lint-free
cloth
Wipe down the glide strips
where the lift arm rollers touch
the system.
Weekly
Glide
Strips
The preventative maintenance schedule is continued on page 14.
Maintain the Rimage 2000i Series II