Protocol support: Radio Access Protocol (RAP)
Integrator’s Guide – RIM 801D OEM Radio Modem
40
RAP frame types
Description
Request network name
This frame causes the radio to send a Current
Network Name reply.
Current network name
This is the radio’s reply to Request network name.
Set battery charge rate
This command has no effect on the RIM 801D
except to set or clear the battery charging flag in
the Radio status frame.
Turn radio receiver on
This frame causes the radio to turn on the
receiver, and send a Radio status reply with the
Receiver Ready status bit set.
Turn radio receiver off
This frame causes the radio to turn off the
receiver and transmitter. Any transmit attempt will
be abandoned. The radio sends a Radio status
reply with the Receiver Ready and Transmitter On
status bits cleared.
Request system
identifier
This frame causes the radio to send a Current
System Identifier reply.
Request static channel
table
The radio sends a Reply Channel Table frame in
response, which lists all of the channel designators
stored in the radio modem’s static channel table.
Request dynamic
channel table
The radio sends a Reply Channel Table frame in
response, which lists all of the channel designators
stored in the radio modem’s dynamic channel
table.
Current System
Identifier
This is the radio’s reply to “Request System
Identifier”
Reply Channel Table
This is the reply to “Request Static Table” and
“Request Dynamic Table” frames.
- end -
