ASSEMBLY & OPERATION
Page 11
B
A
GRINDING
AGAINST
WHEEL ROTATION
The sharpener has been outfitted with a power
switch that permits the grinding wheel to rotate in
the front/forward or the back/reverse direction.
• DISCONNECT SHARPENER FROM POWER!
• Position the machine with the ON/OFF switch
facing you.
• Attach the universal support (A) in the vertical
mounts (B), as shown in Figure 4. Be sure it is
securely positioned and will not move during the
grinding process.
• Rest your workpiece on the universal support
with the sharpened edge pointing away from
you. Grind your workpiece on the face of the wet
wheel. Use the whole width of the stone so that
the face remains flat and does not get worn in
only one spot.
FIG. 4
GRINDING
WITH
WHEEL ROTATION
• DISCONNECT SHARPENER FROM POWER!
• Position the machine with the ON/OFF
switch facing away from you.
• Attach the universal support in the horizontal
mounts as shown in Figure 5. Be sure it is
securely positioned and will not move during use.
• Rest your workpiece on the universal suppo
rt
with the sharpened edge pointing away from you.
Grind your workpiece in the indicated grinding
area.
GRINDING JIG
The grinding jig provided with the wet sharpener
is used for securing a variety of tools, and can
be positioned to grind with and against the wheel
rotation.
To mount the grinding jig:
• DISCONNECT SHARPENER FROM POWER!
• Slide the grinding jig (A) onto the universal
support (B), as illustrated in Figure 6.
• Insert the tool into the jig clamp, then use the
angle guide, as described in the manual, to set
the grinding angle.
• Once the grinding angle is set, tighten both
lock knobs to secure the tool in place.
FIG. 6
FIG. 5
A
B
MOVE TOOL
SIDE-TO-SIDE
OVER STONE
