TROUBLESHOOTING
Page 12
PROBLEM
LIKELY CAUSE(S)
SOLUTION(S)
Red LED & Green LED
do not illuminate on
BATTERY CHARGER
1. Battery not installed in Charger
correctly
2. Charger is not plugged in
1. Remove Battery and reinstall in the Charger
until a “click” is heard
2. Plug in Charger
Battery pack has low
capacity
1. Battery is not fully charged
2. Battery is at the end of duty cycle
1. Do not remove Battery from the Charger until
the Green LED is illuminated
2. Battery has exceeded 100 charging cycles
Trigger Switch will not
depress
1. FWD/REV Switch may be in the
middle locking position
1. Slide the FWD/REV Switch to the left or right
to unlock the Trigger Switch
Cordless Drill does
not start when Trigger
Switch is depressed
1. Battery is completely discharged
2. Defective Battery
3. Cordless Drill is defective
1. Charge Battery or replace with a fully charged
Battery
2. Replace Battery. Email [email protected]
3. Contact Technical Support by emailing
NOTES
