7 Maintenance
7-2. Regular maintenance mode
- 43 -
SD-1DGH
<Environmental Setting "2-4">
Set various operations and functions in the environmental setting.
<Alarm Setpoint Setting "2-4.2">
<<Environmental Setting 1>>
2-4. Environmental Setting
Press SET key.
2-4.0
They are factory-set and not
typically used by the user.
2-4.1 INHIBIT Setting
Set Inhibit.
Select either ON/OFF, and
then press the SET key to
confirm the selection.
When ON is selected, in the
detection mode InHI. and 0.0
(gas concentration value) are
displayed on the LED
alternately. As a result, an
alarm is not triggered to
external device.
2-4.2 Alarm Setpoint Setting
Set the alarm setpoint.
2-4.3 to 2-4.H
They are factory-set and not
typically used by the user.
To 2-4.0
Alarm Setpoint Setting
=> P43
2-4.2
Press SET key.
Alarm Setpoint Setting
Select the number by pressing
the
▲
or
▼
key, and then
press the SET key to confirm
the value. (Press the
MENU/ESC key to go back to
the original state.)
Return to 2-4.2.
LED
LED
