3 Product Components
3-2. Names and functions for each part
- 10 -
<Standard Accessories>
Operating manual
･･････････････････
one
Dedicated handling lever (used for the wiring)
･･････････････････
one
Dedicated control key
････････
The supplied quantity depends on the number of units to be delivered.
1 to 10 units
one
11 to 20 units
two
21 to 50 units
three
over 51 units
four
3-2. Names and functions for each part
(1) MENU/ESC
key
Used to enter the maintenance mode.
It is also used to cancel in a specific mode.
(2) SET
key
It is used for value confirmation and so on in a specific
mode.
(3)
key
Used to switch menus or change a value (UP).
(4)
key
Used to switch menus or change a value (DOWN).
(5) Power
lamp
Power lamp.
Detection mode: It lights up in green.
Maintenance mode: It blinks in green.
(6) Alarm
lamp
Alarm lamp. It lights up in red when the alarm setpoint value
is reached.
(7) Fault
lamp
Fault lamp. It lights up in yellow when an abnormality is
detected in the detector.
(8)
Concentration value
display
Displays the gas concentration and so on.
CAUTION
Use the supplied dedicated control key to operate the detector. If products other than these accessories
are used, key operations cannot be accepted properly.
Note that the control key is made of extremely strong magnet. Putting it close to a magnetic product,
such as a credit card and ID card, may damage the stored data.
(8) Concentration
value display
(5) Power lamp
(6) Alarm lamp
(7) Fault lamp
(1) MENU/ESC key
(2) SET key
(4)
key
(3)
key
