4 How to Use
4-6. Display mode
GP-1000
- 26 -
4-6. Display mode
4-6-1. Entering display mode
This mode can be used to display various data and change settings.
LCD
Display
Entering display mode
Press the DISPLAY button to enter
the display mode.
* Press the
▲
or
▼
button to
select the menu and press
the ENTER button for
display or setting.
[DISPLAY]
Peak display
Displays the maximum
concentration detected during the
period from power-on to the point
of checking.
* Press and hold the RESET
button until "CLEAR -
RELEASE" is displayed.
The peak display can be
cleared.
[DISPLAY]
Concentration displayed gas
reading setting
A pre-registered gas can be read
instead to display its
concentration.
Go to "4-6-2. Concentration
displayed gas reading
setting".
[DISPLAY]
Alarm setpoint display
The alarm setpoint display and
alarm activation can be tested.
Go to "4-6-3. Alarm setpoint
display".
[DISPLAY]
Pump suction volume setting
The pump suction volume can be
set to L: Low or H: High.
Go to "4-6-4. Pump suction
volume setting".
[DISPLAY]
Log data display
The data recorded by the snap
logger can be viewed.
Go to "4-6-5. Log data
display".
[DISPLAY]
Detection mode
