10
４ − ３ ． Installation place
Keep away the system from direct sun drought or where the temperature of the system
is drastically changed.
The system consists of fine electronics parts.
Install them where to be stable not to crush or fall down.
Keep the system from the equipment which may give a high frequency in the surroundings and
install it.
・Do not put the system jointly each. ・Do not wire the cable in parallel nor take access.
Do not install and make gas detection at the place where the sample gas is deposited
.
This unit is required to make maintenance regularly.
Then, do not install at the place where there is danger at maintenance time.
When required to stop the system at maintenance time, unable to maintain if not remove a part of system
or unable to detach the case due to the pipe or rack etc. do not install such place.
Be sure to ground when install.
Do not install at places where direct sun drought or where the temperature is drastically changed.
Do not install it where vibration or shocks may take place.
Keep the system from the equipment which may generate the noise (Unit & cable).
Do not install it where the detection gas is deposited around
.
Do not install at the place where it is danger for maintenance service such as high voltage
cable, etc.
Do not install it where it is unable to make maintenance.
System housing that grounding construction is not enough.
CAUTION
