|17
EN
16
6. ASSEMBLY / DISASSEMBLY PANELS
Note
Only work on the unit when the mains plug has been disconnected
and the stove has cooled down completely�
Note
During assembly / dismantling do not allow objects (screws etc�) to
fall into the pellet container – they can block the screw conveyor
and damage the stove�
Note
During any conversion work, take particular care of your fingers
and any panels and stove attachments� Select soft bases to
prevent scratches to your living space furniture and stove panels�
Remove the cover by simply lifting�
Open the pellet container lid until it stops, in this position, it stays
open�
Now remove the 4 screws on the side panel and lift the side wall�
Steelshell
Remove these screws and tilt the panel, then lift it up�
Stone
For the right front stone remove the self-locking hexagon nut
including the covering plate which serves to seal the pellet container�
Now lift the stone slightly and carefully lift diagonally forward�
Install the removed parts in reverse order�
#20
#20
#8
