- 8 -
E
N
G
L
IS
H
1 . I M P O R T N A N T I N F O R M A T I O N
GENERAL WARNING AND SAFETY
INSTRUCTIONS
The general introductory warning information must
be followed.
-
Read the whole of the manual thoroughly before
commissioning the fire.
Please observe the
national provisions and legislation, as well as the
locally applicable rules and regulations.
-
Only approved transport aids with adequate load
bearing capacity must be used for transporting
your fire.
-
Your fire is not suitable for use as a ladder or
scaffold
- Thermal energy is produced by burning fuel; this
leads to the surface of the fire, the doors, the
door and operating handles, the door glasses,
the flue pipes and possibly the front wall of the
fire becoming very hot. Avoid touching these
parts without wearing the relevant protective
clothing or using the relevant means (cold hand).
E. g. Heat protection glove or shaker hook
forbidden.
-
Make children aware of the danger and keep
them away from the fire when in use.
-
Only burn the approved fuel listed in the chapter
“Clean Burning”.
-
Burning or inserting easily combustible or
explosive materials, such as empty spray cans
and suchlike in the fire, as well as storage of the
same close to the fire is prohibited due to risk of
explosion.
-
When reheating, no wide or easily combustible
clothing should be worn.
-
Setting down of non heat resistant objects on the
fire or nearby is prohibited. Do not lay washing
on the fire to dry. Do not place non-heat
resistant objects on the stove or in the vicinity.
Do not hang washing on the stove to dry.
-
Stands for drying items of clothing or suchlike
must be set up at an adequate distance from the
fire - fire hazard!
-
Working with easily combustible and explosive
materials in the same or adjoining room to the
fire is prohibited when the fire is on.
BEFORE SETTING UP
1.1 Ground load bearing capacity:
Before setting up, ensure that the supporting
construction has a load bearing capacity that will
support the weight of the fire.
Commissioning details are shown on the sticker on
the Ceran area.
The stove must not be modified in any way. Otherwise
this will lead to revocation of the guarantee and
warranty.
SAFETY CLEARANCES (Minimum clearances)
1. From non-combustible items
a > 400 mm b > 100 mm
2. From combustible items and supporting walls made
from reinforced concrete construction
a > 800 mm b > 200 mm
Safety clearances (Minimum clearances)
1.2 Flue pipe connection
Flue pipes are a particular hazard source in respect
of escape of poisonous gas and fire hazard. Obtain
the advice of an appointed specialist company in
respect of laying and fitting the pipes.
When connecting the flue pipe to the chimney, in
the area of walls cladded using wood, please follow
the relevant fitting directives.
