RIKA Cooper E 15701, Manual

Page: 15 / 20

|
15
EN
14
Note
During any conversion work, take particular care of your fingers and any
panels and stove attachments. Select soft bases to prevent scratches to your
living space furniture and stove panels.
Note
Only work on the unit when the stove has cooled down completely.
1. WOOD STORAGE
COMPARTMENT
Screw the two connecting plates onto one of the two wood storage
compartments. Do not tighten the screws too hard.
Slide the wood storage compartments from the side into the free space
between the wall and the stove.
Align the compartments with the screws on a connecting plate.
2. WOOD STORAGE (AIR SUPPLY )
Loosen the 6 screws of the rear cover and remove it.
Cut out the rear wall along the perforation.
Mount the air supply pipe (not included) at the air inlet.
Note
Make sure that everything is air tight!
Mount the rear panel and place the connection cover in position. Installation of
wood storage compartments as described under point 1 above.
#3
#8
#3
#3