Connecting the receiver.
Slide the receiver out from the side of keyboard, and insert to the devices with a stadard
USB interface. Once connected, slide the power switch to the "ON" position located on
the left side of the unit to establish the connection.
Auto sleep and wake feature.
The keyboard also features an auto sleep and auto wake mode. If there is a long period of
inactivity, the keyboard will automatically go inot sleep mode. During the sleep mode,
the user can wake the unit up by pressing any key. The 2.4GHz receiver and keyboard's
RF indicator will continue to flash and will not power down.
Switch off the keyboard after use.
After finish using the keyboard, push the switch to the off position. This turns off the
power, of the keyboard. The USB receiver should be plugged out from the PC and then insert
back in the keyboard so it is being kept safely.
Charging the battery.
The device with built-in lithium-ion battery,please use only approved data lines and
chargers
Note:
fully charge the unit before operating for the first time. This device can be used
when charging, but will extend the charging time;
When battery is low, the low voltage light will flash to warn the user. The unit will
automatically turn off if the battery has been depleted.
Enable the backlight
Once the keyboard has established a connection to the receiver, the backlight keys will
automatically turn on for 3 seconds. The backlight will turn off after 3 seconds to preserve
battery life. To manually turn the backlight on, simply press the key specified above in the
diagram..
(Optional)
