Rigol RM-DS-1B Installation Manual Download Page 3

Page: 3 / 4

Installation Guide

RIGOL

Mount the front plate

Attach the front plate to the assembled rack, and fasten the front plate with six M4

screws.

Place the instrument

Place the instrument onto the bottom plate and ensure that the tabs on the bottom

plate engage the front rubber pads of the instrument.

Downloaded from

Downloaded from

Downloaded from

Summary of Contents for RM-DS-1B

Page 1: ...ustries Association EIA standard Kit Part Checklist No Name Qty Description 1 Front Plate 1 2 Bottom Plate 1 3 Left Plate 1 4 Right Plate 1 5 Rear Bracket 1 6 M4 Screw 14 M4x8 Phillips Pan Head Screw...

Page 2: ...The dimensions of the rack are as shown below Unit mm Installation Procedures Note Only authorized operators are allowed to perform the installation Improper installation might cause damage to the in...

Page 3: ...d rack and fasten the front plate with six M4 screws 3 Place the instrument Place the instrument onto the bottom plate and ensure that the tabs on the bottom plate engage the front rubber pads of the...

Page 4: ...then fasten the rear bracket to the instrument and the bottom plate with four M4 screws 5 Get encased in the cabinet Mount the assembled instrument and rack into a standard 19 inch cabinet using four...