Installation Guide
RIGOL
3
1.
Remove the four rubber protective covers located at the corners of the front panel
and the four ones at the corners of the rear panel of the instrument respectively.
2.
Attach two rails (with the U-channel
facing outward) to both sides of the
bottom plate, and then fasten them
with eight M4 screws.
3.
Attach two side beam fasteners to
the front ends of each rail, as shown
in the figure below, and then secure
them with four M4 screws.
4.
Secure the side beam fasteners to the
cabinet by using four M6 screws and
four M6 nuts.
5.
Attach another two side beam
fasteners to the back ends of each
rail respectively, as shown in the
figure below, and then secure them
with four M4 screws. Use four M6
screws and four M6 nuts to secure
the side beam fasteners to the
cabinet.
6.
Attach the left fastener to the left side
of the instrument, and secure it with
two M4 screws.
7.
Attach one filler panel to the right
side of the instrument, and secure it
with two M4 screws.
Installation Guide
RIGOL
4
8.
Attach another filler panel to the right side of the first installed filler panel, and
secure it with two M4 screws.
9.
Attach the right fastener to the right side of the second filler panel, and secure it with
two M4 screws.
10.
Place the assembled instrument and rack onto the bottom plate. Then, secure the
left and right fasteners to the cabinet with four M6 screws and four M6 nuts.
-End-
