Installation Guide
RIGOL
1
DP700 Rack Mount Kit
RM-1-DP700
This rack mount kit (RM-1-DP700) is designed to mount a single
RIGOL
DP700 series
programmable linear DC power supply into a 19-inch cabinet that conforms to the Electronic
Industries Association (EIA) standard.
Kit Part Checklist (RM-1-DP700)
No.
Name
Qty.
Description
1 Right
Fastener 1
--
2 Filler
Panel
2
--
3 Left
Fastener 1
--
4 Rail
2
--
5
M4 Screw
24
M4x8 Phillips Pan Head Screw
6 Bottom
Plate 1
--
7
Side Beam Fastener
4
--
8 M6
Screw
12
M6x16 Phillips Pan Head Screw
9 M6
Nut
12
M6 Square Lock Cage Nut
5 8 9
RIGOL
3
4
6
7
1
2
5
Installation Guide
RIGOL
2
Installation Tool
The PH2 Philips screwdriver is recommended.
Space Requirements
To mount the instrument into the cabinet correctly, please ensure that the following
requirements are met.
The cabinet must be a standard 19-inch one.
The available height of the cabinet should be at least 4U.
The depth of the cabinet should be at least 500 mm.
The dimensions of the rack are as shown below.
Unit: mm
Installation Procedures
CAUTION
Only authorized operators are allowed to perform the installation. Improper
installation might cause damage to the instrument or an installation failure.
