Rigol DSA1000A Series, Programming Manual

Page: 63 / 174

Chapter 2 Command Systems
RIGOL
Programming Guide for DSA1000A series 2-49
6. :HCOPy:IMAGe:FTYPe
Syntax :HCOPy:IMAGe:FTYPe DEFault|EXIFjpeg
:HCOPy:IMAGe:FTYPe?
Function Specifies the image type you want to print.
The query returns “DEF” or “EXIF”.
Default DEFault (depends on the printer being used)
Front Panel Print Setup, File Type, Default or Exif/JPEG
7. :HCOPy[:IMMediate]
Syntax :HCOPy[:IMMediate]
Function Performs the print job.
Front Panel Print Setup, Print
8. :HCOPy:PAGE:ORIentation
Syntax :HCOPy:PAGE:ORIentation LANDscape|PORTrait
:HCOPy:PAGE:ORIentation?
Function Specifies the paper orientation you want to print.
The query returns “LAND” or “PORT”.
Default LANDscape
Front Panel Print Setup, Orientation, Portr/Portr
9. :HCOPy:PAGE:PRINts
Syntax :HCOPy:PAGE:PRINts <integer>
:HCOPy:PAGE:PRINts?
Function Specifies the number of copies you want to print, such as
:HCOP:PAGE:PRIN 10
The query returns “10”.
Explanations

<integer> ranges from 1 to 999.

This setting is persistent even throuth a power cycle.
Default 1
Front Panel Print Setup, Copies
10. :HCOPy:PAGE:SIZE
Syntax :HCOPy:PAGE:SIZE DEFault|A4|A5|A6|B5
:HCOPy:PAGE:SIZE?
Function Selects a page size from Default, A4, A5, A6 or B5.