Rigol DSA1000A Series, Programming Manual

Page: 129 / 174

Chapter 2 Command Systems
RIGOL
Programming Guide for DSA1000A series 2-115
Front Panel Peak, Peak Table, Peak Sort, Freq/Ampl
5. :TRACe:MATH:PEAK:TABLe:STATe
Syntax :TRACe:MATH:PEAK:TABLe:STATe OFF|ON|0|1
:TRACe:MATH:PEAK:TABLe:STATe?
Function Turns on or off the Peak Table.
The query returns “0” or “1”.
Default OFF|0
Front Panel Peak, Peak Table, State, On/Off
6. :TRACe:MATH:PEAK:THReshold
Syntax :TRACe:MATH:PEAK:THReshold NORMal|DLMore|DLLess
:TRACe:MATH:PEAK:THReshold?
Function Sets the readout type of the peak from Peak Table.
The query returns “NORM”, “DLM” or “DLL”.
Explanations

NORMal: Displaying the first ten qualified peaks in the table.

DLMore: Displaying the first ten peaks that not only meet the
parameter conditions but also have an amplitude greater than
the specified Display Line in the table.

DLLess: Displaying the first ten peaks that not only meet the
parameter conditions but also have an amplitude smaller than
the specified Display Line in the table.
Default NORMal
Front Panel Peak, Peak Table, Pk Readout, Normal/>DL/<DL
7. :TRACe:MATH:STATe
Syntax :TRACe:MATH:STATe OFF|ON|0|1
:TRACe:MATH:STATe?
Function Turns on or off the math trace.
The query returns “0” or “1”.
Default OFF|0
Front Panel Trace, Trace Math, Operate, On/Off
8. :TRACe:MATH:A
Syntax :TRACe:MATH:A T1|T2|T3
:TRACe:MATH:A?
Function Selects a trace as the trace A for the trace math from T1, T2 or T3.